People have switched from using cables to Smart TVs and streaming gadgets like firestick as a result of technical developments. The experience of the consumers is greatly improved by these gadgets. When functioning correctly, it can convert a standard TV into a smart TV. A TV remote and a dongle that plugs into your TV are included with these streaming devices. People have recently complained that their Firestick remote does not function correctly, though. When you want to watch your favorite movie or television show and the remote suddenly stops functioning, it might be annoying. Do you have the same issue? Do not be concerned; we are here to assist you. We’ll talk about possible solutions to the “Firestick Remote not working” problem in this article.
After talking about the causes of the Amazon FireStick remote’s malfunction, it’s time to explore alternative solutions. There are several ways to resolve this problem since there are numerous causes behind it. You must test each one to see which one works best for you. So let’s get into more depth about them.
This is an example of a simple solution to a problem. Every time you use your Firestick, despite how little it uses, power is still used. Additionally, over the course of a year, it adds up. Don’t presume that since you just got fresh batteries that this is the cause. You could have purchased faulty batteries. So, give new batteries a shot.
You must first remove the battery cover from the back of the remote in order to change the batteries in your Firestick remote. Two AAA batteries are typically used by the Amazon Firestick. After changing the batteries, confirm that the problem has been fixed. If not, try the remedies below.
When you purchase a new Amazon Fire TV or any other streaming device with a remote, it comes pre-paired with the device. So you don’t need to do anything extra and may begin exploring your Fire TV gadget.
However, in certain circumstances, your Fire Stick and remote were not paired out of the box, or the device became unpaired over time. If this is the case, try following the instructions to connect your Firestick to your remote.
Check out our two quick ways to Install CCleaner for Firestick
The Fire Stick and Fire TV remotes employ Bluetooth rather than infrared, allowing you to operate your device from across the room. Since the intensity of the Bluetooth signal has nothing to do with the direction of the remote, there’s no need to even aim the remote toward your device.
A variety of things can restrict a remote’s effective range, which is around 30 feet. If there are any obstructions between the remote and the Fire Stick or Fire TV, the remote’s range will be severely reduced. Check to see if there is any obstruction or a distance issue between the remote and the firestick.
If you have the original product, and fresh batteries, and have exhausted all other possibilities, it is time to examine the possibility that the remote is damaged.
If this is the case, your only choice is to purchase a replacement remote. The good news is that replacement remotes are inexpensive. They are available for roughly $10. Go to Amazon and search it up. You will discover lots of possibilities. A customized remote with additional, dedicated buttons for Netflix and other apps may also be available. Volume control is also available on some remotes.
Keep in mind that bespoke remotes are not always from Amazon. Purchase a product with a high rating (at least 4) and more.
If your Firestick remote does not light up, try disconnecting it from the back of your device and waiting 20 seconds. Reconnect it to see whether the problem has been rectified. If the batteries are fully charged, a lack of connection with the Firestick will usually result in the remote not lighting up.
If your Firestick remote stops operating after an update, try the five ways listed below. If the first one doesn’t work, repeat the procedures until the problem is addressed.
For 10 seconds, press and hold the Home button on the remote. If the remote is not already connected to the TV, this step will pair it.
If your Firestick remote stops working after resetting it, you can try the techniques listed below.
Start the Firestick TV again. When you are returned to the remote pairing page, disconnect the TV and reconnect it after 10 seconds. By pushing the “Home” button for 10 seconds, you may pair the remote.
Replace your batteries. Perhaps the batteries are becoming low, and replacing them will cure the problem. Just be sure to correctly install them. It’s also a good idea to purchase a new set of batteries if you suspect the old ones are damaged. Clean the battery compartment of dirt and debris as you change the batteries.
Try another remote. If resetting and replacing the batteries does not resolve the issue, attach another remote to your Firestick TV. You may either borrow one from a friend or buy one online. You may also use the Fire TV app for iPhone or Android as a remote control.
Author’s quick read: Pair Bluetooth Headphones with your Firestick
Finally, being unable to utilize your Firestick remote is never a fun experience. Fortunately, there are solutions for everything, including the remote. Resetting and re-pairing the remote or inserting new batteries are the most popular options. If none of the solutions in this post work for you, you should contact Amazon’s customer support or replace your remote. If you have any other great ideas you can share them with us in the comments section below.
Frequently asked questions:
To unpair, a Fire Stick remote, first pair it with another Fire Stick remote. Navigate to Settings > Controllers & Bluetooth Devices > Amazon Fire TV Remotes using the new remote. Choose the remote to be unpaired, then press the Menu (three lines) button, followed by Select to confirm unpairing.
Download the Fire TV mobile app on one device and build a mobile hotspot on another to connect my FireStick to hotel Wi-Fi without a remote. Change the name and password of the new hotspot to match a network to which your Fire Stick has previously connected. Connect the Fire Stick and app device to the new Wi-Fi hotspot, then operate the Fire Stick and connect it to the hotel Wi-Fi using the app.
Press the Home button on your original Firestick control.
Select Controllers and Bluetooth Devices.
Navigate to Amazon Fire TV Remotes.
Select Add New Remote on the following screen.
Hold down the Home button on your new Firestick remote until it recognizes it.
To use your remote control to reset your Fire TV Stick, switch it on and then press and hold the Back and Right directional buttons for at least 10 seconds. Finally, when you get the pop-up notification, click Reset.